Aerospace mechanisms
CanSat Paraglider Steering Mechanism
Explored motor-driven spool layouts in SolidWorks to route steering lines within the CanSat payload’s limited packaging space.
Team design study · CanSat paraglider steering
My contribution
I contributed to the team’s paraglider steering design, exploring spool and motor arrangements in SolidWorks. The initial four-motor layout exposed a packaging conflict, prompting alternatives for motor orientation, line routing, and mechanism deployment.
Results & observations
The design study identified a space constraint in the original layout and developed alternative assembly arrangements. The available work documents concept development and CAD iteration; it does not establish deployment reliability or flight performance.
A small base, four control lines
The initial concept placed four horizontal spools and four DC motors around a circular base. The layout left too little room to fit the components on the top face. Finding that conflict in CAD gave the next design iteration a concrete problem to solve.
Rethinking the arrangement
The team considered vertical motors, a geared left–right drive with oppositely wound lines, and guides to reduce line tangling. Another proposal folded the mechanism into the payload for spring-driven deployment. The presentation records alternatives under consideration rather than a final selected mechanism.
Packaging and deployment
The design explored several assembly layouts and a separate CanSat assembly concept. Packaging remains the central constraint; deployment and flight performance are unverified.
Tools & methods
- SolidWorks
- Mechanism design
- Assembly modeling
- Packaging studies
- Spool arrangements
- Control-line routing
- Concept evaluation
- Design iteration
